Boat lift service and maintenance in Boca Raton

Who this is for

Every lift owner, and anyone whose lift has gone more than a year without a service.

Tide on Lake Boca Raton

NOAA's Lake Boca Raton gauge, just inside Boca Inlet, records a 2.19 ft mean range and a 2.47 ft great diurnal range (1983 to 2001 epoch). With the dock band set in NAVD88 and the tide close to the inlet's, lift and float travel is planned from these numbers.

The tide range decides how much of the cables and cradle sit in salt water, which drives the service schedule.[1]

Signed lift drawings with pile details

Palm Beach County classes docks, seawalls, boat lifts and boathouses as Type 8 marine structure permits, and its checklist asks for signed and sealed boat lift drawings with pile details and the manufacturer's specifications. Boca Raton's own Chapter 22 review expects the same level of detail before a lift goes in.

Regular service keeps an existing lift working, which avoids the permit a replacement would need.[2][3]

Docks that stop 6 to 8 ft out

Single-family freestanding docks in Boca Raton may protrude no more than 6 to 8 ft waterward of the seawall, depending on canal width (City Code 22-58). That is much tighter than the limits in the other cities we serve, so marginal docks along the wall and seawall-mounted lifts are the usual answer.[4]

What makes Boca Raton different

Plan review needs a current-conditions survey showing the seawall wet face or bulkhead line, the property line and piles, section details with the finished cap elevation, and a proposed site plan. Inspections are staged: a location survey before the cap is poured and before the structural cap and piling inspections, a final engineer report on cap elevation with photos, and a final marine structure survey for docks and lifts.[3]

Agencies beyond the City

Palm Beach County's marine structure checklist for unincorporated areas lists the outside approvals agencies expect to see: FDEP, the Florida Inland Navigation District (FIND) and the Army Corps, as applicable. That checklist is dated 2005, so we confirm current requirements for each job. The federal seagrass range used in dock design covers Palm Beach County waters.[2][5]

Permits in Boca Raton

• City of Boca Raton Development Services: Marine structure permits under City Code Chapter 22, with staged survey and engineer inspections.
• Florida Inland Navigation District (FIND): May be involved for work along the Intracoastal Waterway.
• Florida DEP or South Florida Water Management District: State permit or exemption for docks, walls and lifts on Lake Boca Raton and the Intracoastal Waterway.
• US Army Corps of Engineers, Jacksonville District: Federal authorisation along the Intracoastal, which the Palm Beach County checklist expects to see with the building permit.

What a service visit covers

• Cables: fraying, corrosion, kinks, flattening, tension
• Pulleys and gearbox: lubrication and wear
• Sacrificial zinc anodes: replace as needed
• Motor, switch and wiring checks
• Bunks and cradle: wear and alignment

Frequently asked questions