Boat lift service and maintenance in Miami

Who this is for

Every lift owner, and anyone whose lift has gone more than a year without a service.

The tide at the Miamarina gauge

NOAA's Miami Miamarina station on Biscayne Bay records a mean tidal range of 2.17 ft and a great diurnal range of 2.37 ft, with mean higher high water about 0.26 ft above NAVD 88 (1983 to 2001 tidal epoch). Those numbers set how far a lift has to travel, how far a floating dock rises and falls, and how much freeboard a seawall cap really has.

The tide range decides how much of the cables and cradle sit in salt water, which drives the service schedule.[1]

Old piles and wrecked docks

DERM exempts removing old piles and dilapidated docks, lifts and davits, and repairing dock decking or handrails to their original size. In older Miami neighbourhoods along the river many jobs start with that clean-out, so it can begin before the permit for the new structure is issued.

We handle the lift drawings and permits with the dock.[2]

The 25% waterway rule on the county short form

Miami-Dade DERM handles a single-family dock, davit, boat lift or mooring pile on its short form only if the structure does not protrude more than 25% of the waterway width. On the narrower canals off the Miami River and Little River, that width test is often what decides how far a dock or lift can reach.

Regular service keeps an existing lift working, which avoids the permit a replacement would need.[2]

What makes Miami waterfront work different

Most of Biscayne Bay and its natural tributaries, including the Miami River and Little River, are state-owned submerged lands, so docks over them need the state's consent alongside the DERM permit. The Biscayne Bay Aquatic Preserve is listed by DERM as a permitting contact, and FDEP's free online dock self-certification is not available in aquatic preserves. The federal seagrass range used in dock design reaches central Biscayne Bay.[2][3][4]

City of Miami seawall height

In 2020 the City considered an ordinance (File 7338) to set a 6 ft NAVD 88 minimum for new and rebuilt seawalls east of US-1, outside the Miami River. We have not confirmed that it was adopted, so for every Miami seawall job we confirm the current height rule with the City before design.[5]

Permits in Miami

• Miami-Dade DERM, Coastal Resources Section: Class I permit for any work in, on or over tidal water, the Miami River included, with exempt, expedited and short-form routes for small jobs. Phone (305) 372-6575.
• City of Miami Building Department: Structural and zoning approval for seawalls, docks and lifts inside city limits.
• Florida DEP or South Florida Water Management District: State permit or exemption, and consent to use the state-owned bottom of Biscayne Bay, the Miami River and Little River, which DERM grants for most of the bay on the state's behalf.
• US Army Corps of Engineers, Jacksonville District: Federal sign-off for work in the bay and the river. SPGP VI, the small-project route, passed its stated 27 July 2026 expiry, so we confirm the current route for each job.

What a service visit covers

• Cables: fraying, corrosion, kinks, flattening, tension
• Pulleys and gearbox: lubrication and wear
• Sacrificial zinc anodes: replace as needed
• Motor, switch and wiring checks
• Bunks and cradle: wear and alignment

Frequently asked questions