Boat lift service and maintenance in Coral Gables

Who this is for

Every lift owner, and anyone whose lift has gone more than a year without a service.

A smaller tide in the south bay

NOAA's Cutler gauge on Biscayne Bay, south of the Gables shoreline, shows a 1.94 ft mean range and a 2.13 ft great diurnal range, with mean higher high water about 0.19 ft above NAVD 88 (1983 to 2001 epoch). That is about half a foot less swing than at Government Cut, which helps lift and floating dock design in Cocoplum and Gables Estates.

The tide range decides how much of the cables and cradle sit in salt water, which drives the service schedule.[1][2]

DERM approval comes before the City

Coral Gables will not take dock, mooring or wharf plans without Miami-Dade DERM's preliminary approval, and revised plans need DERM's stamp again. The permit set also needs a notarised Public Works application, dimensions across the waterway, existing mangroves and the installation method, so a lift or dock design gets settled with the county first.

We handle the lift drawings and permits with the dock.[3]

Cocoplum's own dock plan

Properties in Cocoplum Section II must include a copy of the Cocoplum dock plan with their permit, and every Gables dock submittal shows the dimensions across the waterway. On the winding Gables canals that cross-section drawing is what proves a dock or lift leaves room for boats to pass.

Regular service keeps an existing lift working, which avoids the permit a replacement would need.[3]

What makes Coral Gables different

Dock, mooring and wharf plans must show dimensions across the waterway, existing mangroves and the installation method, and carry DERM's preliminary approval; revised plans need a DERM stamp again. Properties in Cocoplum Section II must include a copy of the Cocoplum dock plan. The City also asks for a notarised Public Works permit application, colour photos of existing conditions and a survey.[3]

Fee incentives

Under Resolution 2025-342, living seawalls with pH-neutral cement or modular retrofit panels qualify for a 20% reduction in city permit fees, and a separate fee waiver applies to existing homes making seawall improvements to address sea level rise.[5]

Permits in Coral Gables

• Miami-Dade DERM, Coastal Resources Section: Class I permit, plus the preliminary approval the City asks to see before it looks at any dock or wall plans. Phone (305) 372-6575.
• City of Coral Gables Development Services and Public Works: Building and Public Works permits for seawalls, bulkheads and docks, after DERM preliminary approval.
• Florida DEP or South Florida Water Management District: State permit or exemption for docks and walls on the Gables canals and the bay, where aquatic preserve rules apply to open bay frontage.
• US Army Corps of Engineers, Jacksonville District: Federal authorisation for bayfront and canal work, confirmed for each job since SPGP VI's stated July 2026 expiry.

What a service visit covers

• Cables: fraying, corrosion, kinks, flattening, tension
• Pulleys and gearbox: lubrication and wear
• Sacrificial zinc anodes: replace as needed
• Motor, switch and wiring checks
• Bunks and cradle: wear and alignment

Frequently asked questions