Marine construction in Boca Raton

Palm Beach County manatee zones

Boca Raton waters fall under Palm Beach County's manatee protection zones in state rule 68C-22.009, with boating restricted areas in 68D-24.017 and 68D-24.011. The federal Johnson's seagrass range used for dock design also covers these waters, so pile and dock layouts avoid grass beds.

Marine construction is mostly in-water work, so the manatee rules set daily routines.[1][2]

Signed lift drawings with pile details

Palm Beach County classes docks, seawalls, boat lifts and boathouses as Type 8 marine structure permits, and its checklist asks for signed and sealed boat lift drawings with pile details and the manufacturer's specifications. Boca Raton's own Chapter 22 review expects the same level of detail before a lift goes in.

Piling rules apply to every structure we drive into the bottom.[3][4]

What makes Boca Raton different

Plan review needs a current-conditions survey showing the seawall wet face or bulkhead line, the property line and piles, section details with the finished cap elevation, and a proposed site plan. Inspections are staged: a location survey before the cap is poured and before the structural cap and piling inspections, a final engineer report on cap elevation with photos, and a final marine structure survey for docks and lifts.[4]

Agencies beyond the City

Palm Beach County's marine structure checklist for unincorporated areas lists the outside approvals agencies expect to see: FDEP, the Florida Inland Navigation District (FIND) and the Army Corps, as applicable. That checklist is dated 2005, so we confirm current requirements for each job. The federal seagrass range used in dock design covers Palm Beach County waters.[3][2]

Permits for marine construction in Boca Raton

• City of Boca Raton Development Services: Marine structure permits under City Code Chapter 22, with staged survey and engineer inspections.
• Florida Inland Navigation District (FIND): May be involved for work along the Intracoastal Waterway.
• Florida DEP or South Florida Water Management District: State permit or exemption for docks, walls and lifts on Lake Boca Raton and the Intracoastal Waterway.
• US Army Corps of Engineers, Jacksonville District: Federal authorisation along the Intracoastal, which the Palm Beach County checklist expects to see with the building permit.

What is a marine contractor?

A marine contractor builds structures in, on or over the water: seawalls, bulkheads, docks, pilings and davits. In Florida, specialty contractors' scope is limited to a particular phase of construction, while a general contractor's scope is unlimited as to work requiring licensure under chapter 489. Always check a contractor's licence category on the DBPR licence search before you sign.[7][8]

Permits for work in the water

Most work needs a county environmental permit (in Miami-Dade, a DERM Class I permit), a city building permit, a state decision from FDEP or SFWMD and, where it applies, federal authorisation from the Army Corps of Engineers. Permits attach the state's manatee conditions to all in-water work.[9][10][11]

Frequently asked questions